64
The displayed information means the following:
WATER
HARDNESS —
Water hardness function switched off
WATER
German water hardness degree 1 to 7°
HARDNESS 1
French Water hardness degree 1.79 – 12.53°
WATER
German water hardness degree 8 to 15°
HARDNESS 2
French Water hardness degree 14.32 – 26.85°
WATER
German water hardness degree 16 to 23°
HARDNESS 3
French Water hardness degree 28.64 – 41.17°
WATER
German water hardness degree 24 to 30°
HARDNESS 4
French Water hardness degree 42.96 – 53.7°
When the machine leaves the factory it is adjusted to Level 3. You
can adjust another hardness. To do this, proceed as follows:
䡲
Use the ON/OFF button to switch on the machine.
䡲
MACHINE HEATING
䡲
RINSE – PRESS DRAW-OFF KEY
䡲
Place a cup under the coffee outlet and press one of the draw-off
buttons (ESPRESSO or LUNGO).
䡲
RINSING
䡲
READY
䡲
Press the programming button until the machine switches over to
programming mode.
䡲
FILTER
䡲
Press the arrow keys a number of times until the following
message appears:
䡲
HARDNESS
䡲
Press the programming button to activate the programming step.
䡲
LEVEL 3
䡲
Now, use the arrow keys to select the required hardness.
䡲
LEVEL 4
䡲
Press programming button to confirm your settings.
䡲
HARDNESS
䡲
Press the arrow keys a number of times until the following
message appears:
䡲
EXIT
䡲
Press the programming button to quit the programming mode.
䡲
READY
If you use a Claris plus filter cartridge, this function is no
longer available.
6. Rinsing the coffee machine
When the machine was switched off and has cooled down in
the meantime, a rinsing operation is started when the
machine is switched on again.
䡲
Use the ON/OFF key to switch on the machine.
䡲
MACHINE HEATING
䡲
RINSE – PRESS DRAW-OFF KEY
䡲
Place a cup under the coffee outlet and press one of the draw-off
buttons (ESPRESSO or LUNGO).
䡲
RINSING
䡲
READY
Summary of Contents for N400
Page 3: ...Fig 1 Fig 4 Fig 7 Fig 2 Fig 5 Fig 8 Fig 3 Fig 6 Fig 9 2 1 3 ...
Page 96: ......
Page 97: ......
Page 98: ...N400_02 07 www nespresso com ...
