pg. 5 TQM_057 Effective: September 2016
DESCALING INSTRUCTIONS FOR GEMINI CS223
Please refer to Page 4 to identify your Gemini model
IMPORTANT NOTE- Before starting the descaling process ensure that you
have read the safety instructions on the box and have the following items
available:
Descaling Kit:
CS223
– DKB2C2/B2B (use
6 x 100ml pouches
of descaling liquid each time)
Descaling Tray:
5035/GEMINI (Descaling tray, plastic tube, spanner for steam nozzle)
1.
Turn the white tap (Direct water connection) behind the machine to the
off position (Vertical)
Empty all drip trays and capsule containers and insert them back into place.
Place some container under each of the spouts to collect the water.
2.
Press Standby
on/off
button on the machine. Wait until the red light in the
button stops flashing. All the cup lights should be off.
3.
Press and hold the
“Ristretto/Short Black” and “Lungo/Long Black”
buttons on the left side head
, and the
“standby” button
.
The menu will appear on the display after few seconds.
4.
Press the scroll “UP” (Lungo/Long Black) button or scroll “DOWN”
(Ristretto/Short Black) button until it displays
“start descaling”
Then press
the middle cup (Cappuccino Latte
) button to “SELECT”.
5.
Screen will then display
“Fill descaling fluid push a button”
-
Fill the left side tank with 2 litres of water
.
Add 4 x 100ml pouches of descaling solution.
-
Fill the right side tank with 1 litre of water
.
Add 2 x 100ml pouches of descaling solution.
-
Then push any cup button.
NOTE:
The water capacity for the machine is listed below:
Machine
Water tank capacity
CS223
3 Litres
6.
The machine will now start descaling.
Water will pour out from each spout. When this cycle has finished, it will
stop and
display “Fill water push a button“. Empty the water tanks and rinse
them. Fill the water tanks to the top with clean water and then press any
cup button again for a rinsing cycle.
Important
– If for any reason you need to STOP the descaling process,
press the STANDBY button.
7.
The machine will automatically stop when it has finished rinsing. Display
will show “Exit push a button.”
Push any cup button and the machine will return to its normal state.
Descaling process is now complete and the machine can be used.
