Nespresso BREVILLE EXPERT Manual Download Page 6

EN

6

6

Avoid risk of fatal electric 

shock and fire.

 

In case of an emergency: 

immediately remove the plug 

from the power socket.

 

Only plug the appliance into 

suitable, easily accessible, 

earthed mains connections. 

Make sure that the voltage 

of the power source is the 

same as that specified on the 

rating plate. The use of an 

incorrect connection voids the 

guarantee.

The appliance must only be 

connected after installation.

 

Do not pull the cord over 

sharp edges, clamp it or allow 

it to hang down.

 

Keep the cord away from heat 

and damp.

 

If the supply cord is damaged, 

it must be replaced by the 

manufacturer, its service agent 

or similarly qualified persons, 

in order to avoid all risks.

 

If the cord is damaged, do 

not operate the appliance. 

Return the appliance to 

the 

Nespresso

 Club or to 

Nespresso

 authorised 

representative.

 

If an extension cord is 

required, use only an earthed 

cord with a conductor cross-

section of at least 1.5 mm

2

 or 

matching input power.

 

To avoid hazardous damage, 

never place the appliance on 

or beside hot surfaces such 

as radiators, stoves, ovens, 

gas burners, open flame, or 

similar.

 

Always place it on a horizontal, 

stable and even surface. The 

surface must be resistant to 

heat and fluids, like water, 

coffee, descale fluid or similar 

liquids.

 

Disconnect the appliance from 

the mains when not in use for 

a long period. Disconnect by 

pulling out the plug and not 

by pulling the cord itself or the 

cord may become damaged.

 

Before cleaning and servicing, 

remove the plug from the 

mains socket and let the 

appliance cool down.

 

Never touch the cord with wet 

hands.

 

Never immerse the appliance 

or part of it in water or other 

liquid.

 

Never put the appliance or 

part of it in a dishwasher.

 

Electricity and water together 

is dangerous and can lead to 

fatal electrical shocks.

 

Do not open the appliance. 

Hazardous voltage inside!

 

Do not put anything into any 

openings. Doing so may cause 

fire or electrical shock!

Avoid possible harm when 

operating the appliance.

 

Never leave the appliance 

unattended in case of 

manually operated brewing 

mode. In case of pre-

programmed or remote 

brewing mode, additional 

safety precautions must 

be undertaken to avoid 

any possible harm, such 

as: respect the intended 

use, make sure the cup of 

adequate size is placed on 

the cup support, slider is 

completed closed, ensure 

there is water in the water 

tank and keep the appliance 

and its cord out of reach of 

unassisted children or pets.

 

Do not use the appliance if it 

is damaged or not operating 

perfectly.  Immediately remove 

the plug from the power 

socket. Contact the 

Nespresso

 

Club or 

Nespresso

 authorised 

representative for examination, 

repair or adjustment.

 

A damaged appliance can 

cause electrical shocks, burns 

and fire. 

 

Always completely close the 

Safety Precautions

9555_UM_EXPERT_BREVILLE.indb   6

19.07.16   12:33

Summary of Contents for BREVILLE EXPERT

























Reviews: