Nespresso BARISTA Series, User Manual

Page: 5 / 46

5
EN
Safety Precaution
CAUTION / WARNING
ELECTRICAL DANGER
DISCONNECT DAMAGED
SUPPLY CORD
CAUTION HOT SURFACE
MAGNETS INSIDE
NO FERROMAGNETIC TOOLS
OR MATERIALS
CAUTION STRONG
MAGNETIC FIELD
CAUTION:
The instructions are part
of the appliance. Read and follow
all instructions to avoid possible harm
and damage. Save these instructions
and pass them on to any subsequent
owner.
Avoid risk of fatal electrical
shock and fire
•
Only plug the power base into a
suitable, earthed power socket. Make
sure that the voltage of the power
source is the same as that specified on
the rating plate.
•
Unplug from outlet when not in use
and before cleaning. Allow to cool
before putting on or taking off parts,
and before cleaning the appliance.
•
Plug cord into the wall outlet. To
disconnect, switch off, then remove
plug from wall outlet.
•
Do not pull the cable over sharp edges,
clamp it or allow it to hang down.
•
If the supply cord or the plug are
damaged, they must be replaced by
the manufacturer, its service agent or
similarly qualified persons.
•
Disconnect the power base from the
power socket, when not in use for long
periods. Disconnect by pulling out the
plug and not pulling the cable itself, as
this may damage the cable.
•
Never immerse the power base of
appliance in water or other liquids.
Electricity and water together can
cause a fatal electric shock.
•
To protect against fire, electric shock
and injury to persons do not immerse
cord, plugs, or the device base in
water or other liquid.
•
Disconnect the device from the mains
before the appliance is cleaned, and
ensure that the inlet is dried before the
appliance is used again.
•
The appliance is only to be used with
the jug provided.
•
Short power-supply cords reduce risks
resulting from becoming entangled in
or tripping over a long cord.
•
Longer (or detachable) cords may be
used if care is exercised in their use,
and:1) the marked electrical rating is at
least as great as the electrical rating of
the appliance 2) a grounding-type 3-
wire cord is used 3) cord(s) is arranged
so that it will not drape over the counter
top or table top, where it can be pulled
on or tripped over by anyone.
•
If an extension lead is required, use only