8
9.
OCCUPATIONAL SAFETY
SAFETY DEVICES
ON THE NESCHEN ROLL CUTTER:
•
Emergency STOP switch
- 1 unit
•
Two hand circuit
THE FOLLOWING POINTS MUST BE OBSERVED
WHEN USING THE NESCHEN ROLL CUTTER:
•
Do not use the roll cutter if there is a design or mechanical fault;
•
Do not use the roll cutter under alcohol. Being under the influence of drugs
or medication, as your reaction time and attention may be impaired;
•
Do not switch on the roll cutter if unauthorized persons are within the
danger zone;
•
Remove waste from the hazardous area while the rotary cutter is in
operation;
•
Do not touch any moving parts;
•
Always remain at the control panel while the roll cutter is in operation;
•
Do not remove any safety devices from the roll cutter and do not impair
their function;
•
No maintenance or cleaning work during operation;
•
Always observe the safety instructions - see under Safety instructions.
10.
SAFETY GUIDELINES
Rotating or moving parts of the roll cutter and electrical parts can cause serious and
even fatal injuries. Installation, wiring and commissioning as well as maintenance and
repairs should only be carried out by qualified and appropriately trained personnel.
•
The roll cutter may only be operated by mentally and physically healthy
persons over the age of 18 who have been intensively trained (and tested)
and are authorized to operate the roll cutter.
•
Demanding repairs and work on the electrical system may only be carried
out by qualified personnel or the manufacturer.
•
Operators and maintenance personnel must be familiar with the contents of
the operating instructions.
•
Adjustments, maintenance and cleaning of the roll cutter must be carried
out when the machine is not in operation. The main switch is switched off
and the machine is disconnected from the power supply.
•
Start the roll cutter only when the covers are in place.
