12
13
7. CLEANING
2
4
7
8
3
5
1
6
30 sec
Rinse drip tray with fresh drinking water
and clean it with a clean food-safe brush.
Insert empty capsule holder. Place an empty
large container underneath the coffee outlet.
Remove and empty container.
Warning: Hot water! Handle with care!
Place drip grid on drip tray. Then insert drip
tray at desired position of machine. If any,
remove water from water tank.
Clean with washing-up liquid and fresh
drinking water both sides of capsule holder.
Alternatively wash in dishwasher. Afterwards
dry.
Switch machine on. While machine is
heating up, power button starts blinking
red. After approx. 30 seconds, power button
light turns green. Machine is ready to use.
Rinse and clean water tank. Use a clean
food-safe brush and washing-up liquid as
needed. Afterwards refill with fresh, drinking
water and insert it to machine. The water
tank is not dishwasher proof!
Rinse the machine: Light up all bars to max.
level using touch volume selector. Touch hot
water icon
. Machine starts rinsing. Lights on
bar display display vanish progressively.
Switch machine off. Unplug power plug.
Clean machine with a soft damp cloth.
Dry it afterwards with a soft dry cloth.
9
OFF
ON
8. DESCALING AT LEAST EVERY 3 – 4 MONTHS
1
4
7
2
8
3
6
9
2 min
0.5 L
5 sec
www.dolce-gusto.com
OFF
5
ON
If the beverage comes out slower than usual (even in droplets),
or if it is cooler than usual or if the power button is steady orange
(descaling signal), the machine has to be descaled.
Mix 0.5 litre fresh drinking water with
descaler sachet in a measuring cup.
Pour descaling solution into water tank
and insert water tank into machine.
Touch hot water icon. Bar display begins to
count down. Machine descales in start-stop
operation for approximately 2 minutes.
Wait until extraction stops.
Call the NESCAFÉ® Dolce Gusto®
Hotline or go on the NESCAFÉ® Dolce
Gusto® website. For hotline numbers
see last page.
Insert empty capsule holder. Place an empty
container underneath the coffee outlet.
Touch cold water icon. Bar display begins to
count down. Machine descales in start-stop
operation for approximately 2 minutes until
the water tank is empty.
Switch off machine. If any,
remove water from water tank.
Press and hold power button for at least
5 seconds. Power button blinks alternately
green / orange and machine enters descaling
mode.
For a better effect of the descaler, the machine
enters a waiting time of 2 min. The power
button blinks alternately green / orange during
the waiting time.