12
13
CLEANING DRAWER & MIXING CHAMBER 2/2
Push down lever until you hear a
“Click”.
12
11
In case mesh has been removed:
Check orientation of the mesh (the
mesh has a top and a bottom side).
12
12
Align arrows on slider cover and
main body. Press the slider cover in
until you hear a “Click”.
Make sure that step 11 has been
correctly followed. Push mixing
chamber into the main body. Ensure
it is fully inserted.
12
14
12
15
Pull up blue handle to lock mixing
chamber.
Slide drawer in until you feel the
“Click”.
12
16
12
17
Check the holes inside the mixing
chamber: If the holes are blocked with
coffee, rinse again with hot water.
12
10
Push mesh into original position.
Ensure it is fully inserted.
Check
inside!
Top
Bottom
12
13
Click !
Click !
Click !
Click !
CAUTION! Put none of the parts into a dishwasher!
Switch machine off.
Unplug power cord.
Rinse drip tray with hot water and
clean it with a brush.
CLEANING DRIP TRAY, TANKS & DOSING UNIT 1/2
13
1
13
2
Rinse and clean water tank. After-
wards refill with fresh, potable water
and insert it to machine.
13
3
Turn over the dosing unit and re-
move the upper disk No. 1.
Using the thumbs turn in the direc-
tion of the “OPEN” arrow until you
hear a “Click”.
13
5
13
6
Put your fingers into the openings
and remove lower disk No. 2.
Check whether all three parts are
there.
13
7
13
8
Lower disk
No. 2
Upper disk
No. 1
Dosing unit housing
No. 3
Make sure that coffee tank is empty.
Turn the dosing unit clockwise and
remove it from the coffee box.
13
4
No. 3
No. 1
Wipe away the dirt with a soft damp
cloth. Soak disk No. 1 and disk No. 2
in hot water.
13
9
OFF !
Click !
CAUTION! Put none of the parts into a dishwasher!
Summary of Contents for barista
Page 12: ...www nescafe com sg...
