6.
PREPARING A BEVERAGE
6. 1 ONE CAPSULE (E. G. LUNGO)
1
Adjust drip tray position. Place cup with correct cup size on
drip tray. See "BEVERAGE EXAMPLES" or package. Check if
the water tank contains enough fresh drinking water.
2
Open locking handle. Pull out capsule holder. Machine
switches on automatically. Indicator light starts blinking
red while machine is heating up for approximately 40
seconds. Afterwards indicator lights steady green. Machine
is ready to be used.
3
Make sure rinsing tool is not inside. Insert capsule in
capsule holder. Insert it back into machine. Close locking
handle.
4
Push selection lever to the "HOT" or "COLD" position as
recommended on capsule packs. Beverage preparation
starts.
STOP
5
Stay beside the machine throughout the preparation!After
reaching the desired level push selection lever to the
“STOP” position. Machine stops preparation.
6
After finishing preparation the indicator light blinks red for a
few seconds, and changes to steady green.
During that time
do not open locking handle!
7
When indicator light is steady green open locking handle.
Remove cup from drip tray.
8
Pull out capsule holder. Remove used capsule. Put used
capsule in dustbin.
9
Rinse capsule holder with fresh drinking water from both
sides. Dry capsule holder. Insert it back into machine.
Enjoy your beverage!
10