1
Single-channel radio receiver
Radio
8
11
3
UPMi
Manual
434 MHz, 230 V AC, max 5 A
5
P
3
L
1
2
4
N
1 General information
1.1
Application
The receiver
Radio 81
13
UPMi is designed to control motors of roller shutters and roller
shade.
1.2
Features
?
possibility to program transmitters without the programming button on the receiver’s housing
;
?
convenient side location of contacts
;
?
possibility to connect an extra one-button switch by any producer
.
1.3
Technical characteristics
Working range
,
MHz
..............................................................................................................................................434,42 ± 0,37
Switching current
,
max
À.........................................................................................................................................................
3
Number of motors for operation
.............................................................................................................................................1
Memory (number of transmitters), pcs
...............................................................................................................................500
Duration of commands
“UP”
,
“DOWN”
,
sec.
.....................................................................................................................100
Duration of command “Comfort”
,
sec.
.................................................................................................................................7
Dimensions
,
mm
.........................................................................................................................................................51?51?29
Working temperature
......................................................................................................................................
from
0
to
+ 45°Ñ
Working conditions
.................................................................................................................................
dry heated buildings
IP protection class
...............................................................................................................................................................
IP
2
0
1.
4
Installation and connection of the
Radio 81
13
UPMi
b
)
INSTALLATION
BOX
RADIO 8113 UPM
i
ONE-BUTTON
SWITCH
à)
?
Unpack the
Radio 811
3
UPMi
receiver
.
?
Follow the connection scheme on Fig.1b to install the receiver Radio 8113 UPMi
..
?
Use double-sided skotch tape to fix the Radio 8113 UPMi receiver inside the
installation box.
?
Screw the one-button switch to the installation box
.
Contacts description
:
1 —
connect to UP direction cable of the motor;
2 —
connect to DOWN direction cable of the motor;
3 —
connect to L of the ~
230
V power line;
4 —
connect to N of the ~2
3
0
V power line;
5 —
connect to the one-button switch
.
WALL
Radio 8113 UPMi
3
4 5
1 2
One-button
switch
Motor
Fig.
1
à)
Installation of the 8113
UPMi
;
b
)
connection of the
Radio 8113 UPMi to the motor.
2
Programming the
Radio 8113 UPMi receiver
2.1
Enter the programming mode
:
?
Way 1: press and hold > 4 sec. the switch button or a button of the transmitter
that has been previously programmed until
the motor stops (if it was working) or rolls up and down;
?
Way 2: activate the motor (up or down), stop it and in 3 sec. press the switch or touch the programmed transmitter button
five times (the motor will indicate that the programming mode is activated by making an up and down movement).
