5
Adjust minutes by pressing tune + when done press AL1 again
Now choose to wake up to radio or buzzer
Then select and press AL1
If radio was selected then you can choose a preset station
➢
Press AL1 a red light will light up meaning your alarm is on. Press again red light will disappear
Meaning your alarm is off
Repeat all steps for alarm 2
➢
SNOOZE ALARM
When alarm sounds, press SNOOZE to activate the snooze time
SET SLEEP TIMER
This clock radio can switch to radio off automatically after a preset period.
1. Press
/ FUNCTION to radio mode.
2. Press SNOOZE/DIMMER/SLEEP/SCAN multi-function button repeatedly to select the sleep
timer period (in minutes).
To deactivate the sleep timer, press SNOOZE/DIMMER/SLEEP/SCAN multi-function button
repeatedly until radio shuts off.
ADJUST VOLUME
While listening, press or VOLUME
– to adjust volume.
ADJUST DISPLAY BRIGHTNESS
During standby mode, press DIMMER once to select high press again for low brightness levels.
USB Charging
Use the USB charging port to charge your smartphone
To connect your cell phone for charging:
Use a USB cable (not included) to connect your cell phone to the USB connector on the back of the
Nero Edge clock radio. Your cell phone should start charging.
Backed by the Nero 12 Month Warranty.
Nero is a registered trademark of
R Weatherdon & Co Pty Ltd
Email: [email protected] Ph: +61 2 9906 2202 Visit: www.weatherdon.com.au
Made in China
