until the radio is turned off and the LED shows the time.
Note 1
: The current station (either AM or FM) and also the current volume level
will be memorized at the time when the radio is turned off. Once you turn on
the radio again, the memorized station will broadcast with the memorized
volume level.
Note 2:
For the best FM reception, extend the FM antenna wire to its full
length and vary the direction to capture the strongest signal. Do not connect
the FM antenna wire to an outdoor antenna.
Note 3:
For AM reception, a ferrite-bar antenna is built-in. Since this antenna
is direction oriented, turn the unit to a direction at which the reception becomes
optimal.
PRESETTING YOUR FAVOURITE STATION
You can preset up to 10 stations in 10 memories for each band. These 10 memories
are indicated as preset numbers P01, P02, P03, P04, P05, P06, P07, P08, P09 and P10.
1.
During the radio operation mode, follow step 4 in
“
Operating the radio
”
and tune
the radio into the station that you wish to preset.
2.
Press and hold the SET button (4) for more than 1 second until the last
memorised preset number appears and flashes.
3.
You can then choose the preset number that you want to memorize this station
by pressing MEMORY- (5) to step down the sequence, or by pressing
(6) to step up the sequence.
4.
Once the preset number is chosen, it will keep flashing for 5 seconds. Press
SET button (4) once within these 5 seconds, then the tuned station will be
memorized in this chosen preset number and the LED will stop flashing and
change to show the frequency.
5.
If the SET button (4) is not pressed within these 5 seconds, then the LED will jump
back to show frequency, and the memory storing does not succeed.
6.
If the chosen preset number is already memorized with a station, the above
procedure will allow the newly tuned station to supersede the originally
memorized station.
7.
In following the above steps, you can memorize your 10 most favorite stations
of each band into the 10 preset numbers.
TUNING INTO A PRESET STATION
