9. CONFIGURATION
9.4.2.1 Image Format Control
Width:
Width in pixels of the selected Region-Of-Interest
(ROI).
Height:
Height in pixels of the selected ROI.
Oset X:
Horizontal image coordinate of the top-left corner of
the selected ROI. This coordinate is measured relative
to the image center.
Oset Y:
Vertical image coordinate of the top-left corner of the
selected ROI. This coordinate is measured relative to
the image center.
Binning horizontal: Number of horizontal photosensitive cells that are
combined for one image pixel. There might be condi-
tional dependencies to the binning vertical parameter,
which might have to be adjusted rst.
Binning vertical:
Number of vertical photosensitive cells that are com-
bined for one image pixel. There might be condi-
tional dependencies to the binning horizontal param-
eter, which might have to be adjusted rst.
Pixel format:
Desired pixel encoding mode. For supported formats
see Section 4.2.
9.4.2.2 Analog Control
Black level:
Controls the analog black level as an absolute physical
value.
Gamma:
Controls the gamma correction of pixel intensity.
9.4.2.3 Acquisition Control
Trigger selector:
Selects the trigger that shall be congured.
Trigger mode:
Controls if the selected trigger is active.
Trigger source:
Species the internal signal or physical input line to
use as the trigger source.
Trigger activation:
Species the activation mode of the trigger.
9.4.3 Recommended Settings for Karmin2 Stereo Camera
When using the Karmin2 stereo camera by Nerian Vision Technologies, the
camera is automatically congured with the recommended settings for stereo
vision. However, the trigger settings need to be congured manually according
to your trigger source. When connecting the camera to SceneScan's trigger
port, please select either Trigger 0 or Trigger 1, depending on your congured
trigger source. The trigger polarity is rising edge.
25