Configuration for a 360° view as displayed in Figure B
<image>
...
<TilesX value="6" />
<TilesY value="4" />
...
</image>
<options>
...
<SceneSets value="1-8;9-16;17-24" />
...
</options>
;
You can use the SceneSet parameter to specify the image sequence independent
of the way you setup the 360° view (multiple source images or a tiled source
image). Please refer to the description of the
→ SceneSets parameter for details
on the different ways of defining images contained in a scene set.
Tip:
If you are not sure about the number of images in your tiled source image in
the x and y direction, try entering the value 1 for TilesX and TilesY. In the viewer you
will then see the entire source image structure.
8.11.1 Parameters for Virtual 360° Presentations
The following FSI configuration parameters apply to virtual 360° presentations
only.
Parameters for multiple source images (Method A) only:
Images3D
Description
Node containing the list of source images
Syntax
XML node
Default
—
Context
ROOT node
Query
n/a
Add this node to the top level of a configuration file to list the individual images
for a 360° presentation. You can add the attributes prefix and suffix instead of
providing the complete path for each image individually.
8 FSI Viewer
NeptuneLabs - FSI Viewer
230
