Neptune NPVS150 – Basic Operation Guide Page 4
5.
ADJUSTING DEFAULT SPEEDS
5.01
Short press
until screen displays S1:, S2:, S3: or P: (You cannot enter controller settings
whilst CL: Clock is displayed)
5.02
Press
and hold down for 3 seconds, this will now enter controller settings.
5.03
Select which speed setting you wish to adjust by pressing
or
or
.
5.04
Short press
, press
to scroll right and
to scroll left between digits.
5.05
Short press
or
to increase or decrease the speed setting by 10 RPM. Long Press to increase /
decrease rapidly. (This will not alter the saved settings)
5.06
Short press
to save setting.
5.07
Press
and hold down for 3 seconds, this will now exit the controller settings.
6.
PROGRAMMING TIMER SCHEDULES
The NPVS150 has programmable timer schedules for speed settings 1 and 2. These schedules can be used as a
timer or to schedule speed run times coinciding with external time clock run times.
6.01
Short press
until screen displays S1:, S2:, S3: or P: (You cannot enter controller settings
whilst CL: Clock is displayed)
6.02
Press
and hold down for 3 seconds, this will now enter the controller settings.
6.03
Press
to scroll through menu until 1 o: is displayed to set start time for Speed 1 or 2 o:
displayed to set start time for Speed 2.
6.04
Short press
until digits flash.
6.05
Press
to scroll right and
to scroll left between digits.
6.06
Press
or
to change time.
6.07
Short press
to save setting.
6.08
Press
to scroll through menu until is 1 F: is displayed on screen to set finish time for Speed 1
or 2 F: displayed to set finish time for Speed 2.
