Neptune MRX920, Getting Started Manual

Page: 47 / 68

Getting Started
MRX920 Getting Started Guide 3-23
6 Plug the other end of the power cable into the vehicle
power supply receptacle as illustrated in Figure 3.26.
Figure 3.26 Vehicle Power Supply Cable Inserted In Car
Installing the Antenna
The proper installation of the antenna cable is critical for the optimal
performance of the MRX920. If the cable is crimped, the performance
of the unit degrades significantly.
There are several options for running the cable. Whichever method
works best for you depends on the type of vehicle being used. The most
important consideration when installing the antenna is for the cable to
remain undamaged.
To ensure proper installation of the antenna, complete the following
steps.
1 Referring to Figure 3.1 on page 3-2, connect the RF antenna to the
MRX920 and hand-tighten the connector by turning it clockwise
until it is secured.
Vehicle
power
supply
If there is a red cap on the base assembly, you must remove this cap prior to the
installation of the antenna to its base.