Neptune E-CODER) R450i, Installation And Maintenance Manual

Page: 27 / 40

Completing the E-CODER
®
)R450 i ™ Installation
Before leaving the installation site, complete the following items in the checklist.
Record the E-CODER)R450 i ID for each register.
Verify that you have followed all requirements of this Installation and Maintenance Guide.
Verify that you have recorded all required information.
Clean up any installation debris.
Verify that you have completed all requirements of the Site Work Order.
Inform the customer that you have completed your work. If you were unable to finish,
inform the customer when you will be back to complete the project.
Table 7 – Installation Checklist
E-CODER
®
)R450
i™
Installation and Maintenance Guide
15
Chapter 5: Activating and Testing the E-CODER
®
)R450
i
™