Neptune E-CODER) R450i, Installation And Maintenance Manual

Page: 17 / 40

E-CODER
®
)R450
i™
Installation and Maintenance Guide
5
Chapter 3: General Installation Guidelines
This chapter defines the tools, materials, and general installation information for the
E-CODER
®
)R450 i ™.
Tools and Materials
Tables 1 and 2 show the recommended tools and materials you may need to successfully
install the E-CODER)R450
i .
Some items may not apply to your specific installation, or the list may not contain all
required tools or materials.
Item Description / Recommendation Use
Tool Kit
Tool Kit contains standard tools
including:
l
Screwdrivers.
l
Hammer.
l
Pliers.
l
7/16 wrench.
Various installation procedures
performed by the utility
.
Flashlight Activate the LCD
.
Magnet 6 lb. force, part number 12287-001. Activating the E-CODER)R450 i
.
Installation tool Smartphone or cellular phone. To receive emails
.
Table 2 – Recommended Tools
Item Description / Recommendation Use
Moisture protection compound
Novagard
®
sealant, part number
96018-072.
Connecting the Pit antenna to the
E-CODER)R450
i
Site work order Documentation provided by your
utility. Receiving and recording information
about the work site
Installation tool Smartphone or cellular phone. To receive emails
Table 3 – Recommended Materials