CLIP
CONNECT
CONNECT
CONNECT
FLOW
CONNECT
F
G
Single Stage Ultrafilter (SSU-H)
Shower Installation Guide
1.
CLIP the filter so the FLOW direction is towards the flow of water,
pointing away from the water supply pipe.
2.
CONNECT the water supply pipe flex line to the inlet of the filter.
1.
CONNECT the shower hose to the outlet of the filter.
2.
Refer to either Option 1 or Option 2 for connection to shower head.
www.nephros.com
|
2
Nephros, Inc.
50-3208 r.4
41 Grand Avenue, River Edge, NJ 07661, USA • 201-343-5202
SCREW
ATTACH
SCREW
CONNECT
H
I
Option 1
Option 2
1.
CONNECT the female connector on the shower hose to the
Swivel Connector.
2.
CONNECT the male connector on the swivel connector to the
shower head.
3.
CLIP the attachment on the swivel connector onto the existing
shower hook.
4.
TURN ON the water supply and allow water to run for a few
minutes to purge all the air out of the filter.
5.
CHECK for leaks and tighten any fittings if necessary.
1.
CONNECT the other end of the shower hose to the hand
shower head.
2.
MOUNT the shower holder by its screws at desired position for
holding the hand shower head.
3.
TURN ON the water supply and allow water to run for a few
minutes to purge all the air out of the filter.
4.
CHECK for leaks and tighten any fittings if necessary.