H
EAL
THC
ARE
Questions or issues?
Let us help!
Call:
(201) 343-5202, Ext. 1
Installation Guide
Part #:
70-0285
(See DSU-H Instructions for Use)
Questions or issues?
Let us help!
Call:
(201) 343-5202, Ext. 1
SINK
PULL
BLEACH
SINK
SINK
SCREW
SCREW
SINK
CONNECT
CONNECT
7
10
11
8
9
PULL out syringe plunger to draw the
disinfectant.
DELIVER the disinfectant by pushing in the
syringe until disinfectant is seen coming out of
the spout.
ALLOW disinfectant to dwell in faucet hardware
for 5 minutes.
DISCONNECT the faucet disinfection unit from
the flex line and if gauze has fallen out of spout,
place back in spout so that it is there when
performing disinfection for the other side of sink.
MARK the hole locations of the C-Clips on the
wall.
MOUNT the C-Clips with 2 screws (1 each).
DO NOT REMOVE the blister pack. While
wearing gloves, HOLD the filter by the
transparent portion of the blister pack and tear
away the white backing as shown in Diagram 1.
CONNECT the water valve flex line to the water
valve by the 3/8” compression fitting.
CONNECT a quick connector with bushing to the
other end of the water valve flex line.
TURN ON the water source to ensure there are
no leaks, then turn water source back off.
ATTACH the DSU template (provided in
installation kit) vertically against the wall in a
desired position to ensure that both flex lines are
not stretched.
DISINFECTANT
SINK
SINK
SINK
SINK
PULL
CONNECT
CONNECT
DSU Installation Template
SCREW
SCREW
DSU-H Sink (continued)
AVOID contact between the filter and the cleaning or sanitizing agents.
DO NOT remove blister pack from filter until indicated to protect from
contamination.
Diagram 1