NEOX User manual - Edition 03-2016
42
c
hange
(
or
increase
in
gear
)
THIS is the change from one gear to a higher gear, i.e. from gear 1 to 4 or 8, depending
on the model.
This may be carried out in any situation and dynamics of use without any problem, ap-
plying either minimum or maximum pressure on the pedal cranks (added to the thrust
torque of the motor).
The gear change is sequential and has been designed so that it does not require any
special skill by the user.
In fact the user can set off with any gear engaged. When you press the button to make
the change, the system first engages the desired gear, and once this is engaged, disen-
gages the previous gear. This allows an excellent degree of fluidity and the low noise
levels produced by the system are second to none.
c
limB
(
or
decrease
in
gear
)
THIS is the change from one gear to a lower gear, i.e. from gear 4 or 8, depending on
the model, to gear 1.
As it is an extremely rapid change, the climb must be performed while bearing in mind
some features of the system:
The bike incorporates a SAFETY system that inhibits downward gear changes by the
user while pushing on the pedal. In the event the wrong button is pressed or the repeat-
ed pressing of the button, this system avoids a sudden increase in pedalling frequency
that could unbalance the user, resulting in danger to themselves or others.
Therefore, to perform the CLIMB (increase in gear) just REDUCE pressure on the pedal
to a minimum until the sensor measuring the torque transmitted to the pedal gives
consent (via software) to the system to change down a gear.
This system allows you to change up a gear in total safety both for the user and for
your Neox device.
Gear
-
Gear
+
01
