background image

 

IMPORTANT SAFETY INSTRUCTIONS 

When using an electrical appliance, basic precautions should always be followed, including the 

following: 

Read all instructions before using. 

DANGER - To reduce the risk of electric shock: 

1)

 

Always unplug this appliance from the electrical outlet immediately after using and before 

cleaning. 

WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons: 

1)

 

An appliance should never be left unattended when plugged in. Unplug from outlet when not in 

use, and before putting on or taking off parts. 

2)

 

Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric 

shock, or injury to persons. 

3)

 

Close supervision is necessary when this appliance is used by, on, or near children, invalids, or 

disabled persons. 

4)

 

Use this appliance only for its intended use as described in this manual. Do not use attachments 

not recommended by the manufacturer. 

5)

 

Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it 

has been dropped or damaged, or dropped into water. Return the appliance to a service center 

for examination and repair. 

6)

 

Do not carry this appliance by supply cord or use cord as a handle. 

7)

 

Keep the cord away from heated surfaces. 

8)

 

Never operate the appliance with the air openings blocked. Keep the air openings free of lint, 

hair, and the like. 

9)

 

Never drop or insert any object into any opening. 

10) Do not use outdoors. 

11) Do not operate where aerosol (spray) products are being used or where oxygen is being 

administered. 

12) To disconnect, turn all controls to the off position, then remove plug from outlet. 

13) To protect against risk of electrical shock do not put power supply cord or power supply unit in 

water. 

14) This appliance is for commercial use only. 

SAVE THESE INSTRUCTIONS 

 

 

 

Summary of Contents for Chairman TS-97S







Reviews: