N3830 Router
Operation Guide
Copyright © Neoway Technology Co., Ltd
13
Step 2:
Put the screws into the screw holes, and use a screwdriver to fix them onto the surface of the
installation position.
The red circles in Figure 6-3 marks the areas for the screws. Two screws in total are required.
Step 3:
After fixing the screws, pull the device once to ensure that the device is firmly fixed.
Figure 6-3 Holes for wall-mounted installation
6.6.2 Wall-mounted Removal
Perform the following operations: hold the device, and use a screwdriver to remove the two screws
fixed on the device. See Figure 6-3 for the screw positions.
6.6.3 Guide-Rail Installation
Perform the following operations:
Step 1:
Place the device on a surface where the device is to be installed, and aim the four screw holes of
the guide rail at the four screw holes on the shell.
Step 2:
Hold the guide rail, use a screwdriver to fasten screws one by one as shown in Figure 6-4.