N21 EVK
User Guide
Copyright © Neoway Technology Co., Ltd
6
Insert the M5X0-PWR board, and the computer displays
Prolific USB-to-Serial Comm Port
under the
Port (COM and LPT)
node in Device Manager.
Then you can start the commissioning.
Step 4:
Start the commissioning tool and set baud rate.
On Neo_ComTool, set the baud rate to 57600 or a value lower.
Input any AT command, and the UART outputs
+PBREADY
, indicating that the module
automatically detects a baud rate.
STATUS and NET indicators are switched off by default after N21 is started successfully.
You can input
AT+LEDMODE=1
to enable indicators.
−
If STATUS indicator is green ON, the module is running.
−
If NET indicator is green on, the module registers with a network successfully.
−
If NET indicator flashes green, the moduel activates PPP link successfully.
Step 5:
Test and debug the functions of N21 based on its AT Command Manual.
