Neousys Technology POC-400 Series, User Manual

Page: 8 / 99

Safety Precautions
Safety Precautions
⚫
Read these instructions carefully before you install, operate, or transport the
system.
⚫
Install the system or DIN rail associated with, at a sturdy location
⚫
Install the power socket outlet near the system where it is easily accessible
⚫
Secure each system module(s) using its retaining screws
⚫
Place power cords and other connection cables away from foot traffic. Do not
place items over power cords and make sure they do not rest against data
cables
⚫
Shutdown, disconnect all cables from the system and ground yourself before
touching internal modules
⚫
Ensure that the correct power range is being used before powering the device
⚫
Should a module fail, arrange for a replacement as soon as possible to
minimize down-time
⚫
By means of a power cord connected to a socket-outlet with earthing
connection
⚫
This product is intended to be supplied by a Listed Power Adapter or DC
power source, rated 8-35Vdc, 16A, Tma 70 degree C and 5000m altitude
during operation. If further assistance is required, please contact Neousys
Technology
⚫
If the system is not going to be used for a long time, disconnect it from mains
(power socket) to avoid transient over-voltage