Neousys Technology POC-400 Series, User Manual

Page: 29 / 99

POC-400 Series
29
2.3.1 Power Button
The power button is a non-latched switch for ATX mode on/off operation. Press to
turn on the system, PWR LED should light up and to turn off, you can either issue a
shutdown command in the OS, or just press the power button. In case of system
halts, you can press and hold the power button for 5 seconds to force-shutdown the
system. Please note that there is a 5 seconds interval between two on/off operations
(i.e. once turning off the system, you will need to wait for 5 seconds to initiate another
power-on operation).
2.3.2 Reset Button
The reset button is used to manually reset the system in case of system halt or
malfunction. To avoid unexpected reset, the button is purposely placed behind the
panel. To reset, please use a pin-like object (eg. tip of a pen) to access the reset
button.