After setting the current for your PCIE
frame grabber card by following
1. Open the chassis of the host computer and expose the x4 PCI Express slot (or a
compatible x16 PCI Express slot).
2. If you are going to use the internal USB port, please Install cable fi
You can tighten the cable through fixing hole on PCB.
3. Get cable through the chassis
4. Align and insert the golden finger of PCIe
contacted.
5. Fix the PCIe-USB380/340 to the host computer using with a screw.
After setting the current for your PCIE-USB380/340 card, you can install the PCIe
the steps listed below.
Open the chassis of the host computer and expose the x4 PCI Express slot (or a
compatible x16 PCI Express slot).
the internal USB port, please Install cable first (PCIE
ou can tighten the cable through fixing hole on PCB.
Get cable through the chassis (PCIE-USB380 only).
Align and insert the golden finger of PCIe-USB380 into the PCI Express slot until it
to the host computer using with a screw.
the PCIe-USB380
Open the chassis of the host computer and expose the x4 PCI Express slot (or a
rst (PCIE-USB380 only).
USB380 into the PCI Express slot until it’s firmly
