Neousys Technology PCIe-PoE334LP, User Manual, Page: 16 / 39

PCIe-PoE334LP
16
3 PCIe-PoE334LP Card Installation
Once you have set up the DIP switch ID of your PCIe-PoE334LP for multi-card installation, then
you are ready to install the PCIe-PoE334LP into the system. To install the PCIe-PoE334LP, please
refer to the following procedure.
Before disassembling the system enclosure and installing the PCIe-PoE550X card, please read the
following instructions:

DO NOT remove the card out of the anti-static until you are ready to install it into the system.

It is recommended that only qualified service personnel should install and service this product
to avoid injury or damage to the system.

Please observe all ESD procedures at all times to avoid damaging the equipment.

Before disassembling your system, please make sure the system has powered off, all cables
and antennae (power, video, data, etc.) are disconnected.

Place the system on a flat and sturdy surface (remove from mounts or out of server cabinets)
before proceeding with the installation/ replacement procedure.