Neousys Technology Nuvo-3000 Series User Manual Download Page 17

Page: 17 / 101

Nuvo-3000 Series User’s Manual

Page 17 of

101

1.3 Supported CPU List

Nuvo-3000 series accepts a PGA-type Intel® 3

-Gen i7/i5/3 processor via the rPGA988

CPU socket. In addition to i7-3610QE, i5-3610ME and Celeron 1020E, you may also select

other processor listed below according to your consideration of cost and performance.

Intel® Core™ i7-3840QM Processor (8M Cache, up to 3.80 GHz)

Intel® Core™ i7-3820QM Processor (8M Cache, up to 3.70 GHz)

Intel® Core™ i7-3740QM Processor (6M Cache, up to 3.70 GHz)

Intel® Core™ i7-3720QM Processor (6M Cache, up to 3.60 GHz)

Intel® Core™ i7-3630QM Processor (6M Cache, up to 3.40 GHz)

Intel® Core™ i7-3612QM Processor (6M Cache, up to 3.10 GHz)

Intel® Core™ i7-3610QM Processor (6M Cache, up to 3.30 GHz)

Intel® Core™ i7-3610QE Processor (6M Cache, up to 3.30 GHz) *

Intel® Core™ i7-3540M Processor (4M Cache, up to 3.70 GHz)

Intel® Core™ i7-3520M Processor (4M Cache, up to 3.60 GHz)

Intel® Core™ i5-3610ME Processor (3M Cache, up to 3.30 GHz) *

Intel® Core™ i5-3380M Processor (3M Cache, up to 3.60 GHz)

Intel® Core™ i5-3360M Processor (3M Cache, up to 3.50 GHz)

Intel® Core™ i5-3340M Processor (3M Cache, up to 3.40 GHz)

Intel® Core™ i5-3320M Processor (3M Cache, up to 3.30 GHz)

Intel® Core™ i5-3230M Processor (3M Cache, up to 3.20 GHz)

Intel® Core™ i5-3210M Processor (3M Cache, up to 3.10 GHz)

Intel® Core™ i3-3120ME Processor (3M Cache, 2.40 GHz) *

Intel® Core™ i3-3120M Processor (3M Cache, 2.50 GHz)

Intel® Core™ i3-3110M Processor (3M Cache, 2.40 GHz)

Intel® Celeron® Processor 1020M (2M Cache, 2.10 GHz)

Intel® Celeron® Processor 1020E (2M Cache, 2.20 GHz) *

Intel® Celeron® Processor 1000M (2M Cache, 1.80 GHz)

The processors with * are listed in Intel® Embedded Roadmap and with a 7-year life cycle

support (2013~2019).

Summary of Contents for Nuvo-3000 Series






























































































Search results

Summary of Contents for Nuvo-3000 Series

Reviews:

Related manuals for Nuvo-3000 Series

Brands by name

Popular brands

Neousys Technology Nuvo-3000 Series, User Manual

Search results

Summary of Contents for Nuvo-3000 Series

Reviews:

Related manuals for Nuvo-3000 Series

Brands by name

Popular brands