17
TM 1000
FIN
SWE
NOR
DK
DE
GB
Overview
Product specification
Safety instructions
Scope of delivery
The TimerModule turns the Basis System with room temperatu-
re regulator and actuator into a convenient and energy-saving
individual room control. The desired heating times and alloca-
ted heating zones are controlled using the integrated 2-channel
digital clock. The clear LCD display and the programme buttons
facilitate comfortable programming of the individual heating
times.
The TimerModule is an extension module for the following
terminals:
230 V:
AB 2000-1 / AB 2000-6
24 V:
AB 4001-1 / AB 4001-6
Wireless: AB 4071-6 / AB 4071-12
0-10 V: AB 5001-6
1 x TimerModul TM 1000
1 x User Manual
Designated application
The TimerModule is an extension module for connection units
detailed in the product specification. It can be used to control
the temperature setback respectively heating times. Modificati-
ons or alterations to this equipment are only permitted after the
manufacturer’s approval.
The manufacturer does not accept liabilities for damages caused
by improper use of the TimerModule.
Authorised specialists
Installation of electrical systems shall only be carried out by trai-
ned , qualified specialists in accordance with the national, valid
regulations and in compliance with the ordinances stipulated by
the local power authorities. The installation works are to be car-
ried out with the power off in principle.
Sources of Danger
For wiring work on the TimerModule, the system must be dis-
connected from the power. To clean the unit use a clean, dry
cloth for cleaning.
In case of an emergency
Immediately disconnect the entire individual room control sys-
tem from the mains.
HANDBUCH
TimerModul
TM 1000
8-D51-40-842_EA_ABTM1000_OEM_6Spr_Rev1-0.indd 17
21.06.2007 14:13:16