background image

OPERATING   INSTRUCTIONS   conEnued      

6   

SWING:

      

The   louvre   automa6cally   turns   to   upright   posi6on   when   the   appliance   is   first   turned   ON.      

Press   once   and   the   air   louvre   will   move   from   90°   upright   posi6on   to   45°   to   aid   
clothes      drying;   the   SWING   LED   will   illuminate.      Press   again   and   the   air   louvre   will   

return   to   the   90°   angle   and   the   SWING   LED   turns   off   .   

   

TIMER:   

Press   the   TIMER   buAon   through   the   sequence   below.   

   
   

   

   
   

Press   the   TIMER   buAon   to   set   running   hours   (1,   2,   4   or   8   hours).      When   the   6mer   is   set   the   

corresponding   LED   will   illuminate   displaying   the   6me   sejng.      

   

   

ION:   

Ionizers   use   electricity   to   create   nega6ve   electrons.   These   electrons   stream   into   the   air   and   

aAract    oxygen    molecules.    At    this    point,    they    become    nega6ve    ions    and    are    aAracted    to   
airborne    par6cles.    These    molecules    build    up    around    the    par6cles    un6l    they    become    too   

heavy   to   remain   air   borne   and   float   to   the   ground.   
   

ALARM:

   

The   alarm   will   sound      and   the   ALARM   LED   will   illuminate   if   a   malfunc6on   is   detected.      The   
appliance   will   shut   down   automa6cally   if   the   internal   temperature   is   too   high.      Disconnect   

the   appliance   from   the   mains   socket   outlet   and   wait   for   15   minutes   before   re-­‐connec6ng   
the    appliance    to    the    mains    socket    outlet    and    con6nuing    with    normal    opera6on.        If    the   

alarm    fault    con6nues;    contact    your    authorised    service    agent    immediately    for    further   

advise.   

   

1   Hour   

2   Hours      

4   Hours      

8   Hours

      

In    CONTINUOUS    opera6on    the    desiccant    wheel    will    operate    to    remove    ALL    moisture   

present   in   the   air   &   fabric   of   the   building.   At   40%,   50%   &   60%   the   appliance   will   operate   

to   achieve   the   set   humidity.      Once   achieved,   the   desiccant   wheel   will   stop   opera6ng   un6l   
the   rela6ve   humidity   rises   above   the   set   humidity.      

Summary of Contents for M947015















Reviews: