Neostar Electronics 3244363, Instruction Manual

Page: 5 / 7

4 Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW
Enquiries: 0344 482 9700

Repeat/Random mode
Press the “ Play mode “ button (21) during playback to select repeat and random function, a single track, or all the tracks
can be played in difference mode as follow:-
For CD
(1) Repeat 1 (2) Repeat all track (3) Random (4) Off mode
Indicator
Play mode on LCD display
Repeat track
Repeat all ALL
Random RAN
Off mode --------------
For MP3 file
(1) Repeat 1 (2) repeat all tracks (3) repeat 1 folder
(5) Off mode (4) random
Indicator
Play mode on LCD display
Repeat single track
Repeat single folder
Repeat all tracks ALL
Random mode RAN
Off mode
 Repeat play
You can listen to the desired track or whole disc repeat using this function.
 Random play
You can listen to all the tracks in a random order using this function

Folder select
1. Press “Folder/ Pre-up (24)” to select the folder number.
2. Press “Skip up or Skip down ” button (19/12) to select the track number.
MP3 track format requirement:-
-
Bit rate : 32 kbps~320kbps, sampling rate : 32khz, 44.1khz and 48 kHz decodable
- The performance of playing MP3 disc will vary depending on the quality of recording disc and the method of
recording. Furthermore, the searching lead-time for MP3-CD is longer than normal CD due to the format.
CD disc programming
Up to 20 tacks can be programmed for disc play in any order. Before use, be sure to press the stop button.
1. Set in CD mode.
2. Press the Memory button (23), “MEMORY“ & “P01” will appear and flashing on LCD display (9).
3. Select a desired track by using the Skip up
/Skip down buttons (19/12).
4. Press the Memory button (23) to enter the track into the memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6. When all the desired tracks have been programmed, press “Play/Pause
“button (18) to play the disc in the
order you have programmed.
7. Press “Stop
”
button (11) to terminate program play.
 Press “ Stop
”
button (11) at CD stop mode to cancel all programmed memory until the “ MEMORY “ indicator
disappear on LCD display (8).

For MP3 disc / file, press the “ Folder up “ button (24) to select the 1
st
track of next folder directly this will speed up
the song selection.
 The programming mode will automatically stop if no button is being pressed in a period of about 30 seconds after
pressing the Memory button (23).