2
C
C
h
h
a
a
p
p
t
t
e
e
r
r
1
1
-
-
-
-
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
s
s
This chapter will help you connect the [NeonSTB]. For proper connection, please
complete each step in order.
•
Step 1: Audio/Video Connections
•
Step 2: Telephone Connection
•
Step 3: Optional Connections
•
Step 4: Attach Power
Step 1: Audio/Video Connections
The [NeonSTB] uses your television to display pictures and web pages in your
living room. You must connect the [NeonSTB] to the video input of your
television or VCR. Your television has at least one of the following different
types of video input jacks: S-Video, A/V composite video, or RF coaxial. If you
are unsure which video jack(s) you have, locate the connector panel on the back
of your TV and compare the available jacks to the pictures below.
NOTE: Remember to use either S-Video or A/V Video, not both. (S-Video will
result in better quality).
Connections
If your television has an S-Video jack, you should use
the S-Video cable because it will provide the best
picture quality.
If your TV has only a RF coaxial jack, you must connect
the [NeonSTB] to your TV through a VCR. In this
scenario, do the following:
1. Connect the [NeonSTB] to the VCR by either S-
Video or A/V Video Cable
2. Connect VCR to TV by RF Coaxial cable
3. Set your VCR to Video Mode
4. Set Television to the appropriate channel (3 or 4).
Most modern television sets have RCA type A/V jacks.
An A/V connection to the [NeonSTB] can be made
directly to the television, or if your VCR is already
connected to your television, connect the [NeonSTB] to
your VCR.
S-video
RF
Composite
