Overview ..................................................................................................1
Controls and display ...............................................................................1
Settings .....................................................................................................1
Initial power up ..................................................................................................1
Pairing procedure ..............................................................................................2
Operating .................................................................................................1
Temperatures setting .........................................................................................1
Factory settings ...................................................................................................2
Troubleshooting .......................................................................................2
Technical specifications
.........................................................................2
What is a room thermostat......................................................................2
RTE0RFa NEO ENG FP V02 29 05 2015
RT0 RF
WIRELESS ROOM THERMOSTAT AND
RECEIVER
1
OPERATING
INSTRUCTIONS
1-
To start: insert the two AA bat-
teries provided into the battery
compartment.
Once batteries are fitted all
symbols will be displayed on
the LCD screen as shown for
two seconds.
2-
After 2 seconds, the LCD will
show:
- The ambient temperature (°C)
solid.
- The icon
is solid when the
heating is turned ON.
- The setpoint temperature (°C)
solid.
- RF icon flashes.
Note:
When the batteries must be changed, a low battery level indicator
appears on the device.
Remember to take used batteries to battery collection points so they can
be recycled.
• Thermostat
Thank you for purchasing our RT0 RF, wireless
digital room thermostat.
It is by listening to your requirements we
have created and designed our products
to be easy to operate and install.
It is this ease of operation that is intended
to make your life easier and help you save
energy and money.
OVERVIEW
CONTROLS AND DISPLAY
INITIAL POWER UP
SETTINGS
• LCD Display
C
C
Measured room
temperature
Pairing icon
Low battery
icon
Frost protection
icon
Call for heat
icon
Temperature
setpoint
C
C
Batteries
compartment
Rotary dial
Reset
button
LCD display
RF test button
PAIRING PROCEDURE
The thermostat and the receiver are not bonded together at the facto-
ry.
To bond the transmitter and the receiver together, proceed as below:
2-
Within 1 minute, press and hold
for
5 seconds
the RF test button
on the thermostat. Pairing icon
is flashing.
1-
Press and hold for
5 seconds
the RF test button on the
receiver. RF test green light is
blinking.
C
C
5 sec
Override
RF Test
Override
RF Test
5 sec
C
C
