Neomatica LLC”. Tag ADM34 ver..1.0 of 21.11.2022
4 Configuration
The tag is supplied switched with factory settings. By default continuous transmission is set,
the period of transmission is 1 second, the protocol is ADM.
If default settings comply with the set goals, it is not necessary to make configuration.
Configuration is done in the application "ADM BLE-Configurator" in OS Android.
4.1
Configuration of the tag in "ADM BLE-Configurator"
To check or change the tag settings, wait until it is detected and click on the icon
to go to the menu “Control”. If the tag is not detected, press both buttons at the same time and hold
them not less than 10-15 seconds before the beep, then try detecting again.
4.2 Main parameters of the tag
The tag configuration contains three levels that depend on each other. We recommend
setting three main parameters in the following order: mode of operation, submode, data package
control.
Summary of Contents for ADM34
Page 1: ......
