Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019
28
Example of commands input:
BLEFUEL 0,E5F2A9527B1D
– add address E5:F2:A9:52:7B:1D to cell 0;
BLEFUEL E5F2A9527B1D
– add address E5:F2: A9:52:7B:1D to the end of the list.
6.3.4.1 Data receiving from connected fuel level sensors
BLEFUELINFO
command allows to require the latest data, received by the tracker from the
sensor.
BLEFUELINFO X
– data display from the sensor number X, where X – device number from the
BLEFUEL sensors list.
BLEFUELINFO
– command without parameters displays the data from all set sensors.
Answer example: BLEFUELINFO: [0]:0018E9C64433; DT:4; F:7; L:27; T:23; DTC: 0; LMT:5; R:-67
Decoding of the answer for ESCORT TD-BLE:
DT – device type
T - temperature
L
– fuel level
V
– current battery voltage value of the fuel level sensor
F
– software version
LMT
– time passed since the last message from the sensor was received
R - RSSI
Decoding of the answer for DUT-E:
DT - device type
F - software version
L - fuel level
T - temperature
DTC
– failure mask. Fields of the mask are described in the sensor protocol
LMT - time passed since the last message from the sensor was received
R - RSSI
Decoding of the answer for GNOM:
DT - device type
F - software version
P - pressure characteristics in the pneumatic system
T - temperature
