Neoline WIDE S49, User Manual

Page: 18 / 25

17
Parking Mode
Parking m ode is intended to fix events at the parking place .
- Press button to enter main menu .
- Use buttons /
- Use buttons /
to select Parking m ode and press button
OK
to
select By G-sensor or By Motion Sensor
and press button .
- Press button to exit menu .
Element
By G- sensor
By Motion Sensor
OFF Parking m ode is off.
Description
Upon disconnection of external power supply, the
system will issue message: "Press OK to switch off
or Parking m ode will be activated after 10
seconds". It means that after 60 seconds the
system will automatically go into the vibration
detection mode; when video camera will detect
any external vibration affecting the motor car, the
video recording will last 10 seconds and the video
file will be protected. If button OK is pressed within
10 seconds, the video camera will switch off instead
of going into vibration detection.
Upon disconnection of external power supply, the
system will issue message: "Press
OK to switch off or
Parking m ode will be activated after 10 seconds".
That is, if a motion in front of the the camera lens or
an external effect (vibration) is detected, the system
will automatically switch on the motion sensor after
10 seconds, the video recording will last during 10
seconds if the system detects vibration, and will last
for the next 10 seconds until termination of the
vibration effect. If button
OK
is pressed within 10
seconds, the device switches off without activation of
Parking m ode.