11
6. DVR Operation
Device preparation
A. Insert the microSD card into the memory card slot.
Turn off the device before installing a memory card; insert the memory card until it
is locked.
Installing the card:
Turn the microSD card to the slot as shown
in the picture and insert it until it clicks.
Removing a card:
Press the card slightly and then remove it
from the slot.
CAUTION!
Attempting to insert a memory card wrong may damage the device
and/or the memory card itself. Make sure the memory card is in the correct
position.
Warning:
Do not apply excessive force when inserting a memory card to avoid
damage to the device. To insert a memory card, insert the microSD card into the
slot until it locks (clicks); if necessary, use a needle to push the card further. To
remove the memory card, push the card until it clicks and remove the card from the
slot, if necessary, use a needle to push the card.
Turning the Device ON/OFF
When the car engine starts, the device turns on automatically.
Turning ON/OFF
Press and hold the power key for 3 seconds to turn on the device manually.
