8
9
5. DOWN/MIC
Short press in Video mode turns the microphone on / off. In the
Settings menu the button is used to move through the menu items
(down). In Play mode pressing the button allows you to select a
video or photo for playing / viewing. While a video is being played,
pressing the button starts to fast forward.
6. MODE
Pause the video recording before pressing this button. In Standby
mode a short press switches between the operating modes: Video /
Photo / Play.
7. SWITCH
Short press switches between the main and rear camera.
8. RESET
Press to force the device to restart, in case the DVR does not respond
to pressing the buttons.
9. Memory card slot
The slot is designed to install a micro SD card in the DVR. Turn off the
device before inserting the memory card.
CAUTION:
Attempting to insert a memory card with the wrong side
may damage the device and the memory card itself. Make sure that
the memory card is in the correct position.
Warning:
do not use excessive force when inserting a memory card
to avoid damaging the device. Insert the micro SD card into the slot
until it locks (until it clicks). Use a needle to push the card if necessary.
To remove the memory card, press it until it clicks and remove the
card from the slot. Use a needle if necessary.
10. USB Connector
The USB connector is designed to connect the power and charge the
battery. Connect the dashcam to the vehicle’s electric net through
the supplied charger.
11. AV Input
The AV connector is designed to connect the rear-view camera.
Summary of Contents for G-Tech X27
Page 15: ...28...
