3.3.6. Settings / Groups N/A
3.3.7. Settings / Peripherals N/A
This page enables to label the device, the power outlet of the ePowerSwitch and the shutdown function.
Names of up to 32
alphanumeric characters in length are supported and appear in log files, Syslog
messages and SNMP traps to avoid confusions.
1. Open you browser and log in to the Administrator's Page, (ex.
http://192.168.100.200/sysadmin.htm
).
2. Enter the administrator name and password (default for both = admin). The home page appears.
3. Click on the Settings Tab, on the Peripherals Tab and then on the Edit symbol.
Following new page appears, allowing you to define the labels.
Name:
In these fields, enter the name you want to give to the device. The name can be from 1 to 32
characters long, and can contain alphanumeric characters.
Do not use quotes or special characters in labels!
Activated
This check box must be checked to activate the device and enables to deactivate it temporarily while
keeping all its settings for a later use.
21
