GETTING STARTED
Launch the NeoGuard app
and go to “Settings” (swipe
left once)
Press the “+” icon in the
top right corner
Scan the QR code, it can be
found on the rear side of the
moton sensor
Name the device > Choose a
Trigger Mode >
“Save” > “Yes”
iOS: Send
Open the MotionPet
Attach the mounting bracket to
a wall using the two provided
screws
Connect the two parts of the
bracket (insert the ball into the
opening) and fix the motion
sensor on the bracket
Unwrap the battery and
insert it properly. Close the
MotionPet and tighten the
protection screw