NeoGate TE200 Administrator Guide
www.yeastar.com Page 12
5.1 Network Preferences
5.1.1 LAN Settings
Figure 5-1
·
DHCP
If this option is set as yes, TE200 will act as DHCP client to get an available IP address
from your local network. Not recommended or you cannot access TE200 without the
right IP address.
·
Enable SSH
This is the advanced way to access the device, you can use the putty software to access
the device. In the SSH access, you can do more advance setting and debug. It‟s disabled
by default.
·
Port
: the default is 8022; you can change it to another one
·
Hostname
Set the host name for TE200.
·
IP Address
Set the IP Address for TE200.
It is recommended to configure a static IP address for TE200
·
Subnet Mask
Set the subnet mask for TE200.
·
Gateway
Set the gateway for TE200.
·
Primary DNS
Set the primary DNS for TE200.
·
Secondary DNS
