NeoGate TB400 User Manual
www.yeastar.com
9
Euroisdn: Euro ISDN
Qsig: Minimalistic protocol to build a ‘network’ with two or more pbx of different
vendors.
·PRI Dialplan
Sets an option required for some (rare) switches that require a dialplan
parameter to be passed. This option is ignored by most PRI switches. It may be
necessary on a few pieces of hardware. This option can almost always be left
unchanged from the default.
·Reset Interval
Set the time in seconds between restart of unused channels. Some PBXs don't
like channel restarts. so set the interval to a very long interval e.g. 100000000
or 'never' to disable *entirely*. If you are in Israel, the following is important:
As Bezeq in Israel doesn't like the B-Channel resets happening on the lines, it is
best to set the resetinterval to 'never' when installing a box in Israel. Our past
experience also shows that this parameter may also cause issues on local
switches in the UK and China.
PRI Local Dialplan
Sets an option required for some (rare) switches that require a dialplan
parameter to be passed. This option is ignored by most PRI switches. It may be
necessary on a few pieces of hardware. This option can almost always be left
unchanged from the default.
·Overlap Dial
Whether MyPBX can dial this switch using overlap digits. If you need Direct
Dial-in (DDI; in German \"Durchwahl\") you should change this to yes, then
MyPBX will wait after the last digit it receives.
·PRI Indication
Tells how MyPBX should indicate Busy() and Congestion() to the switch/user.
Accepted values are:
inband: MyPBX plays indication tones without answering; not available on all
PRI/BRI subscription lines
outofband: MyPBX disconnects with busy/congestion information code so the
switch will play the indication tones to the caller. Busy() will now do same as
setting PRI_CAUSE=17 and Hangup().
·Enable Facility
To enable transmission of facility-based ISDN supplementary services (such as
caller name from CPE over facility), enable this option.
Downloaded from
www.Manualslib.com
manuals search engine