21
4.2. File Mounting
1.Method to mount one file:
First select one file, click”mount”, then you will enter into one mounting page, above picture is an
example of one file in mounting.
(1) On the top-left corner shows mounting process, chip list---by the variation of blue line, you
can track process of mounting constantly.
(2) On the bottom-left corner shows some feedback during mounting process.
(3) One the top-right corner shows the status of picking and picking alignment
(4) On the bottom-right corner shows some control information
Air pressure of 4 nozzles
Placement speed, can be changed by manual during mounting
Non-stop mount,this is used in one-stop smt production line, add conveyors in front and
behind,
Auto-eject PCB once finished, when select this option, after finished mounting task, PCB
will eject its working area automatically
Another control information,Continuous/Step/Pause/Eject PCB front-side manually/Stop
Continuous, The machine will obey its order and work constantly
Step, The machine will work one single step
Pause, The machine will stop its work instantly
Eject PCB front-side manually, In order to catch the PCB, after PCB assembly, click this
option, PCB will eject from its feeding position. Kindly notice: After pause the machine then you
can carry out this order.
Stop, before click this option, you need to click “pause” first
