5
Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW
Enquiries: 0344 482 9700
www.scottsandco.co.uk
Cleaning & Maintenance
1). Disconnect plug and wait until the unit is cooled down completely. Clean after using every time.
2). If the pots/pans are used without being cleaned, this may cause discoloration or cooked on
stains.
3). Do not use benzine, thinner, scrubbing brush or polishing powder to clean the induction cooker.
4). Wipe using dish washing soap and damp cloth.
5). Use vacuum cleaner to suck up dirt from the air intake and exhaust vent.
6). Never run water over the unit (if water gets inside may cause malfunction).
Error Messages:
E0: Check the pan is usable on this appliance.
E1: Check whether the Voltage is too low, should not be lower than 88V.
E2: Check whether the Voltage is too high, should not be higher than 280V.
E3: Check whether heat sensor has overheated or there is a short circuit.
E4: Heat sensor could have stopped working.
E5: Transistor has is over heated or there is a short circuit.
E6: Transistor could have stopped working.
Model
ALP-DC92
Voltage/ Frequency
220-240V~,50/60Hz
Rated Power
2000W
Unit Size
282*311*72mm
N.W.
2.0 kg