Waterproof Case Care
Keep the rubber seal on the waterproof case clean and free of any foreign objects. Hair and sand can cause
leakage. Best care is to clean the waterproof case with a non-dust cloth.
After every use in salt water, you will need to rinse the outside of the waterproof case housing with non-salt
water and thoroughly dry. Failure to do so may eventually cause corrosion of the hinge pin and salt buildup in
the seal, which can cause failure or leakage.
Do not remove or reset the seal on the waterproof case housing. It may cause leaks and damage to your
camera.
Adhesive Mounts
Clean the attachment surface before attaching the mount to the surface. Wax, oil, dirt, and other debris will
reduce adhesion which can result in a weak bond or even losing your camera.
Attach a mount only in room temperature conditions and allow the mount to set before use. The mount will not
bond well in very cold or damp environments.
Adhesive mounts can only be mounted to a smooth, clean, surface.
For best results, please attach your mount at a minimum of 24 hours before use.
3
