P. 10
Neo Proton IP 12 QA -
W-DMX WIRELESS SETTING
The Proton IP 12 QA features an onboard W-DMX
receiver. By default, W-DMX is OFF. To activate:
• Press the MENU button until the display shows
Wireless Setting, Then press ENTER.
• Press the UP/DOWN buttons to select Receive
On, then press ENTER.
• To reset the onboard W.DMX receiver, select
Receive Reset, then press ENTER.
AUTO SHOW
If no DMX control signal is present at the DMX IN-
PUT, the unit independently runs through its show
programme provided that the blackout mode is
switched off:
• Press the button MENU so many times until the
display shows Auto Show, then press the button
ENTER.
• Press the button UP/DOWN to switch between
the show (Auto 1-5). The unit will operate in
show mode.
English version
Menu Structure (cont
'
d)
Wireless Setting
Receive On/Off
On
Default: Off
Off
Receive Reset
No
Default: No
Yes
Back Light
On
Default: On
10S
20S
30S
Key Lock
On
Password: Up Down Up
Down Enter
Default: On
Off
Information
Fixture Hours
<9999H>
Version
<V1.0>
Reset Factory
No
Default: No
Yes
White Balance
Off
Default: Off
Manual
Red
<125-255>
Green
<125-255>
Blue
<125-255>
Amber
<125-255>
LED Frequency
600Hz
Default 1200Hz
1200Hz
2000Hz
4000Hz
6000Hz
25kHZ
