NEO PODMAZV1, Installation Manual And User'S Manual, Page: 21 / 36

21
Installation
Installation should only be performed by a qualified professional. Beware of sharp edges to avoid injury and exercise
caution when removing trims as they may break. The module should be placed at an accessible location to allow AUX cable
to be connected, such as in the glove box, the center console or under the front seat.
1 Pull vehicle into service bay and access radio/center console.
2 Disconnect both battery terminals. These cables must be disconnected during installation to ensure proper initialization
of the module when it is connected.
3 Before pulling out the radio, removing surrounding trims and screws. Most trims can be removed by carefully pulling on
the piece or using trim removal tools. Trim is usually held in place by snap-in clips.
4 The radio is held in place by a few bolts. To remove these a 10mm socket is usually needed. Consult your dealership if
additional information is needed on removing the radio.