TECHNICAL
IDENTIFY INFRARED RECEIVER/TRANSMITTER
1
48V
2
HDBaseT Output
3
IR Receiver (RX)
4
HDMI Input
5
IR Emitter (TX)
6
HDBaseT Input
7
IR Receiver (RX)
8
HDMI Output
9
IR Emitter (TX)
neo:Lite Transmitter
neo:Lite Receiver
IR Emitter/Receiver Pin Out
A
Ground
B
IR Signal
B
5V
IR Receiver
IR Emitter
A
B C
2
INSTALLATION
1
Connect a single CAT5e/6/7 cable between the Receiver and
Transmitter using the HDBaseT ports
2
Connect a HDMI cable
*
between the Transmitter’s HDMI Input and the
source device (i.e. a blu-ray player)
3
Connect a HDMI cable
*
between the Receiver’s HDMI Output and the
receiving device (i.e. a LCD TV)
4
Connect the supplied IR Transmitter over the source’s IR sensor
(Please refer to the above images to identify the IR Emitter and IR
Receiver)
5
The IR Emitter is to be mounted with the sticky pad horizontally over
the source device’s infrared sensor and the Receiver bud vertically on
the underside of the TV.
6
Connect the supplied power supply to the Transmitter
7
Check the LEDs on the Receiver and Transmitter to ensure correct
installation and connection:
The Yellow LED will illuminate when connected to a video link
The Green LED will illuminate when the device is connected to the
power supply
* HDMI cables are not supplied with this extender set
1
6
3
7
4
8
5
9
