background image

P. 7

 - Neo Nexus Switch 24

English version

status, then the Mode only can be set as SIN-

GLE,HTP or LTP. 

4.  Protocol, can be set as ArtNet/ sACN/ KlingNet; 

5.  Framerte/fs, adjust the speed of DMX output. 

6.  Principal, adjust the value. 

7.  Secondary, adjust the value. 

8.  Resend, adjust or disable the value for universal 

of network. 

9.  Pixel Type, available under klingnet protocol. 

10.  Pixel Width, available under klingnet protocol. 

11.  Pixel Height, available under klingnet protocol.

Normal mode

 means it will send the data received 

from DMX IN port to the universal of network re-

gardless if there is any data in the universal of the 

network.

Backup mode

 refers that when there is any data 

on the universal of network, the CA-AN08 won’t 

send any data to universal of network. Only when 

the universal of network is no any data, then the 

CA-AN08 will receive the data from DMX IN port and 

send it to the universal of network simultaneously.

Single

 means this port will only output one univer-

sal. 

LTP

 means this port will output the latter one 

between the universal of principle and secondly. 

The unit will compare the two universal and resend 

the later one to the network. 

HTP

 means the port will output the one with higher 

value between the universal of principle and sec-

ondly. The unit will compare the two universal and 

resend the higher data to the network. They can be 

set within the range of 0.0-F.F./001-255. (These two 

formats can be change through Display Mode). 1-24 

DMX port disabled:

Any of the port 1-24 can be set as Disabled status. 

Upon the port has been set as Disabled status, 

the DMX port will be disabled, it cannot send or 

receive any data from now on.

Please note

 that the Framerte/fs only available 

for Output status; The Secondly and Resendop-

tiononlyavailablefor the HTP/LTPmodeunder 

thestatusof Output.

Set ID NO.

Enter into the main menu by press MENU button, 

pressing UP and DOWN to choose the Set ID NO. 

option, then press the ENTER to confirm your 

selection. You can set the ID No. for the unit from 

000 to 255. The ID is only used to recognize each 

of the unit easily.

User Preset

Enter into the main menu by press MENU button, 

then pressing the UP and DOWN to choose the 

User Preset option and then press the ENTER 

to confirm your selection. This setting help you 

easily use the application avoid complicated set-

Summary of Contents for NEXUS SWITCH 24



















Reviews: