NEO HS2128 E, User Manual

Page: 10 / 40

Chapter 4.0 Arming the System
4.0 Arming the System
The PowerSeries Neo system can be armed using a keypad, a 2-way wireless key or a proximity
tag.
4.1 Arming the System (Infinite Exit Delay)
In an attempt to reduce false alarms, your system is designed to notify you of an improper exit when
arming the system. When using the Push to Set, or Final Door Set feature, attempting to arm your
system will start an infinite exit delay. The keypad will sound a beep once per second. When you
have opened and closed the final exit door, or after pressing the Push to Set button, the exit delay
will be reduced to a programmable value, which is typically 10 seconds, after which the alarm will
complete the setting. The panel used this time period to allow time for the detectors on the system
to return to their normal state. When this time expires, the system checks for detect-
ors/windows/doors that may be open. If any of these are open, the panel will cancel the arming. If
this occurs, you must re-enter the premises, check the system, close any open zones, and then
attempt to arm again.
4.2 Away Arming the System with the Keypad
Away mode activates the complete alarm system by:
l
Arming all perimeter sensors.
l
Arming all interior sensors.
To Arm the System in Away Mode LCD Display
1. Ensure all windows and doors are closed and that the Ready
indicator is on.
Date Time
JAN 02/13 2:06a
2. To arm using the Away key , press and hold the Away
key for 2 seconds and, if required, enter your [access code] or
present your proximity tag.
OR
To Quick Arm the system press [*][0].
System is
Ready to Arm
then
Present Tag or
Enter Code
3. If zones have been bypassed, ICN or LED keypads bypass
LED will light and the bypassed zones #s will be shown.
On an LCD keypad a warning appears.
* Warning *
Bypass Active
4. After successfully initiating the arming sequence the:
l
Armed indicator turns on.
l
Ready indicator remains lit.
l
Exit Delay timer begins counting down.
l
Keypad beeps six times, continues beeping once per second
until beeping rapidly in the final ten seconds.
l
The system may be configured to have a persistent exit
delay that only ends when the exit door is opened and
closed, or when a button is pressed outside the protected
premises.
Exit Delay in
Progress
- 9 -